about us


feed pellet mill for making poultry farm feed, wood pellet mill for making biomass pellets,and chaff cutter for cutting straw and stalks

new article

new comment

new quote




08 | 2019/09 | 10
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 - - - - -

DATE: CATEGORY:oil press machine
the peanut roaster is suitable for roasting/drying different oil-materials, such as rapeseeds, peanut, soybean, sesame seeds, cottonseed, coconut, palm, rice bran,corn embryo, etc. It can be used for roasting the kinds of plant seeds , to improve the oil production capacity and oil output rate. the peanut roaster is used with oil press for making peanut oil in oil factory,it is also used for drying different materials including different plant seeds and sawdust. This peanut roaster machine is used to roast the peanut before peeling the red skin. After roasting the peeling rate is high, the broken rate is under 5%.This peanut roaster machine uses gas or electricity as fuel, uses the new type heat pipe as heat-conducting medium.Taking advantage of the cycling of hot air in the pipe, the roster cans exposure the heat energy to the baked object.this peanut roaster machine is suitable to toast sunflower seeds,melon seeds,pine nut,coffee bean,hazel,This peanut roasting machine is a small drying equipment, whic can be fried peanuts, soybeans, rapeseed, sunflower and other oil crops. Normally the temperature is controlled in 160-230°C in the seeds frying process (the temperature depends on the crops), crops in medium well cooked are appropriate.pistachio nut,watermelon seeds, peanut/groundnuts, pumpkin seeds.

Good performance gas peanut roaster machine with high efficiency introduction

1.the peanut roaster is suitable material: peanut, broad bean, sunflower seed, cashew nuts, pumpkin seeds etc.

2.Time needed for one drum: about 40 minutes (according to the nature of the raw material.

3.Temperature needed: 0oC~ 300oC adjustable. The low temperature is for drying and high temperature is for roasting. the peanut roaster has low temperature, Short time, High temperature, long time.

4.Each drum has its own electric or gas control system.

5.The drums can not only works at the same time, but also works separately.





copyright © 2019 wood pellet mill/feed pellet mill/chaff cutter all rights reserved.Powered by FC2 博客